Bike Sizing Measurement Instructions
If you already own a bike with a comfortable, well-adjusted position, you can use these measurements without needing an in-person sizing session first.However, if you have any doubts, we recommend sending a photo of your current bike (to verify if it is set up proportionally) as well as a photo of yourself sitting on the bike.
01
Dimension A
Saddle Height: Measured from the center of the bottom bracket to the saddle height (taken approximately at the middle of the saddle's length).
02
Dimension B
Reach to Handlebar: The distance from the tip of the saddle to the center of the handlebar.
03
Dimension C
Reach to Shift Levers: The distance from the tip of the saddle to the hollow of the brake/shift lever (where your hand naturally rests between your thumb and index finger).
04
Inner Leg Length
Preparation: Stand barefoot against a wall with your feet slightly apart (hip-width).Positioning the Book: Take a book and place it between your legs, pulling it up firmly (but not too hard) against your ischial tuberosities—the sit bones you rest on while riding a saddle.Alignment: Press one side of the book flat against the wall, ensuring the top edge of the book is completely level.Measuring: Measure the vertical distance from the top edge of the book straight down to the floor.