1. Recreational Use
   
   
   • • Raccoon bike intended for recreational riding on paved roads, bike paths, and moderately difficult terrain routes (e.g., gravel).
     • Standard use, such as commuting to work, weekend trips, or light off-trail routes.
     • Użytek sportowy

       • • Rower może być używany do bardziej intensywnej jazdy, takiej jak treningi sportowe, wyścigi lub jazda po trudniejszym terenie (np. górzystym).
         • Warunkiem jest, aby użytkowanie było zgodne z przeznaczeniem konkretnego modelu roweru (np. rowery szosowe tylko na nawierzchniach utwardzonych).
     • Użytek turystyczny

       • • Dotyczy długich wypraw rowerowych z obciążeniem (bagażem), pod warunkiem, że rower został odpowiednio dostosowany (np. założenie bagażnika i sakw).
         • Gwarancja obejmuje użytkowanie w różnych warunkach pogodowych, o ile rower jest regularnie konserwowany.

1. Normal Part Wear

   • • Elements such as tires, tubes, brake pads, chain, cassette, cables and housings, pedals, bar tape, grips, etc. are not covered by warranty, as they wear out during normal operation.
2. Mechanical Damage

   • • Improper transport and storage - Improper mounting of the bike on a car rack or during transport can result in damage to the frame, fork, or wheels
     • Accidents and collisions - Collisions with vehicles, other cyclists, or fixed obstacles (e.g., curbs, trees) can cause serious damage to the frame, wheels, drivetrain, and handlebars. Any damage resulting from accidents, collisions, improper use (e.g., jumps, wheelies, overloading) or neglect is not covered by warranty.
     • Falls on uneven terrain, e.g., while riding on gravel, mountain trails, or slippery surfaces, can lead to fractures and deformations.
     • Improper use - Riding on terrain for which the bike is not adapted, e.g., extreme mountain descents on a road bike, can result in damage to components such as fork, frame, or shock absorbers.
     • Jumps or stunts on bikes that are not designed for this can lead to frame cracks, wheel damage, or drivetrain damage.
     • Bike overloading - Exceeding the maximum bike capacity (120kg - bike + luggage/baskets, holders, etc. + person riding the bike), e.g., carrying too heavy luggage, can cause damage to the frame, hubs, spokes, and other components.
     • Using the bike by a person whose weight exceeds the permissible limits can result in deformation of the frame or shock absorbers.
     • Lack of maintenance and neglect - Neglecting regular maintenance, such as lack of chain lubrication, can lead to faster wear of components, including sprockets and derailleurs.
     • Too loose or too tight bolts can cause damage to threads, fastening elements, or can result in loosening of components, e.g., handlebars or saddle.
     • Storing the bike in a humid place or outdoors can accelerate corrosion, especially of steel parts.
     • Damage resulting from atmospheric conditions - Extreme temperatures can affect the elasticity and durability of some materials, e.g., plastic or rubber elements.
     • Rain, snow, and mud can cause corrosion of metal parts and wear of the drivetrain.
     • Damage resulting from modifications and improper repairs - Modifications performed independently without proper knowledge or use of non-original parts can lead to damage to components such as derailleurs, brakes, or shock absorbers.
     • Improperly performed repairs, e.g., inaccurate bolt tightening, can result in play, which can lead to further damage.
3. Modifications and Unauthorized Repairs

   • • Warranty does not cover bikes that have been modified in a way inconsistent with manufacturer instructions (e.g., changing frame geometry, welding, gluing, painting).
     • Warranty is also voided in case of repairs performed at unauthorized service centers or using non-original replacement parts.
4. Corrosion and Paint Coating Damage

   • • Warranty does not cover corrosion or changes in paint coating resulting from atmospheric factors, chemicals (e.g., road salt) or improper care.
     • Paint damage resulting from scratches, chips, or other mechanical damage is also excluded from warranty.
5. Improper Storage and Maintenance

   • • A bike stored in conditions exposing it to moisture, extreme temperatures, or other adverse factors may lose warranty.
     • Neglecting regular maintenance, including chain lubrication, derailleur and brake adjustments, may result in warranty exclusion.
6. Commercial Use

   • • Warranty does not cover bikes used for commercial purposes, such as rental, bike couriers, passenger transport (e.g., rickshaws) or cargo bikes, unless this is explicitly specified in the warranty terms.

1. 1. Riding Safety

      • • Always wear a protective helmet and appropriate clothing and footwear. Riding without protection can lead to serious injuries in case of an accident.
        • Before each ride, check the technical condition of the bike, especially brakes, tires, tube pressure, and proper derailleur operation.
   2. Proper Bike Adjustment

      • • Make sure the bike is properly adjusted to your height and weight. Improper fit can lead to loss of control over the bike.
        • Do not use the bike for jumps, descents on difficult terrain, or any extreme maneuvers if the model is not designed for this.
   3. Bike Overloading

      • • Do not exceed the maximum user weight and luggage load (120kg - bike + luggage/baskets, holders, etc. + person riding the bike), which are specified by the manufacturer. Bike overloading can lead to damage and warranty void.
        • Avoid carrying additional people if the bike is not adapted for this.
   4. Weather Conditions

      • • Avoid riding in conditions that may be dangerous, such as slippery surfaces, heavy rain, snow, or ice. In such conditions, braking and maneuvering are impaired.
        • Store the bike in a dry and sheltered place. Exposure to moisture can lead to corrosion and other damage.
   5. Regular Maintenance

      • • Take care of regular bike maintenance, including cleaning and lubricating the chain and adjusting brakes and derailleurs. Neglecting maintenance can lead to damage and dangerous situations on the road.
        • Use only original replacement parts and accessories to avoid warranty void.
   6. Modifications and Repairs

      • • Do not make independent modifications to the frame or other structural elements of the bike. All repairs should be performed by an authorized service center.
        • Modifications to the brake system, derailleurs, or other components can lead to warranty void and pose a threat to the user.
   7. Lighting and Visibility

      • • In conditions of limited visibility, such as dusk, night, or fog, always use lighting and reflectors to increase your visibility to other road users.
   8. Improper Use

      • • Avoid using the bike for purposes other than riding according to its intended use. The bike is not adapted for use as a means of transport for carrying heavy loads or for commercial use, unless this is explicitly specified in the specification.

1. Brake Check
   • • Make sure both brakes (front and rear) work properly. Press the brake levers and check that the brake pads or brake discs make contact with the rim or disc.
     • Brake pads should not be excessively worn, and brake cables should not be cracked or rusted.
2. Wheel and Tire Control

   • • Check that tires are properly inflated. Tire pressure should be in accordance with the value indicated on the tire sidewall.
     • Make sure tires have no visible cracks, cuts, or other damage.
     • Wheel rims should be straight, without visible warping, and spokes well tensioned.
3. Chain and Drivetrain

   • • Check that the chain is clean and properly lubricated. Avoid excessive amounts of lubricant, which can attract dirt.
     • Make sure derailleurs work smoothly and gear shifting is not problematic.
     • Check the condition of sprockets on the cassette and crankset - they should not be excessively worn or rusted.
4. Frame and Component Parts

   • • Check that the frame, fork, and other components (e.g., handlebars, stem, seatpost) have no cracks, deformations, or visible damage.
     • Make sure all bolts and fastenings (e.g., handlebars, saddle, pedals) are properly tightened. Use the appropriate torque recommended by the manufacturer.
5. Saddle and Handlebars

   • • Check that the saddle is set at the appropriate height and is well secured.
     • Make sure the handlebars are properly positioned and do not rotate in the stem. All handlebar fastenings should be properly tightened.
6. Lighting and Reflectors

   • • If you plan to ride after dark or in conditions of limited visibility, check that lighting (front and rear) works properly.
     • Make sure the bike is equipped with reflectors in accordance with applicable regulations (e.g., on pedals, front and rear).
7. Shock Absorbers (if installed)

   • • Check that front and/or rear shock absorbers work smoothly, without oil leaks or other problems.
     • Hardness and rebound settings should be adjusted to your weight and riding style.

• Brakes - Check operation efficiency, condition of pads/discs and cables.
• Drivetrain - Control of chain, sprockets, derailleurs and shifters.
• Handlebars and stem - Stability, no play and proper positioning.
• Wheels and tires - Pressure, tire condition, rim straightness.
• Saddle and seatpost - Height, stability and no damage.
• Lighting and reflectors - Light operation and presence of reflectors.
• Shock absorbers (if present) - Checking smooth operation and tightness.

1. • • sponges, brushes, and a mild cleaning agent (e.g., a special bike cleaning fluid or dish soap diluted with water) to wash the frame, wheels, and other components.
     • Avoid using high-pressure washers, which can damage bearings or introduce water into places where it can cause corrosion.
     • Rinse the bike thoroughly with clean water to remove cleaning agent residue, and dry it with a soft cloth.
2. Cleaning the Drivetrain

   • • Clean the chain, cassette, crankset, and derailleurs using a special bike degreaser. You can use a brush or special chain cleaning machine to thoroughly remove dirt.
     • Rinse components with clean water and dry.
3. Cleaning Brakes

   • • If you have disc brakes, use a dedicated disc cleaning agent to remove contamination. Do not touch disc surfaces with bare hands to avoid leaving greasy marks.
     • Check the condition of brake pads and remove any contamination.
4. Cleaning Shock Absorbers and Seals

   • • If the bike is equipped with shock absorbers, wipe them gently with a clean cloth to remove dust and dirt. Avoid using high-pressure washers near shock absorber seals.

1. • • After every cleaning, lubricate the chain with appropriate bicycle chain lubricant. Apply the lubricant evenly to the entire chain, then wipe off any excess to prevent dirt attraction.
     • Depending on weather conditions, you can use dry lubricant (for dry conditions) or wet lubricant (for wet conditions).
2. Lubrication and Maintenance of Other Components

   • • Check the condition of cables and housings. If they are corroded or worn, replace them.
     • If necessary, apply a small amount of lubricant to moving parts, such as derailleurs, shifters, hubs, and other places subject to friction.
3. Brake Control and Maintenance

   • • Check the condition of brake pads and replace them if they are worn. Brake adjustment may be necessary to ensure proper operation.
     • For disc brakes, check pad thickness and disc condition. If they are too worn, replace them.
4. Tire Pressure Check

   • • Regularly check tire pressure and adjust it according to manufacturer recommendations (value indicated on tire sidewall).
     • In case of tire damage (e.g., cracks, wear), replace them with new ones.
5. Shock Absorbers and Suspension

   • • If the bike has suspension, check its operation and regularly service it according to manufacturer recommendations. Air shock absorbers require appropriate pressure, which should be adjusted to the user's weight.
6. Play Control and Bolt Tightening

   • • Regularly check that all bolts and fastenings are properly tightened, especially those concerning handlebars, saddle, stem, and wheels.
     • Make sure there is no play in hub bearings, bottom bracket, headset, or pedals.

1. Store in a Dry Place

   • • The bicycle should be stored in a dry place, protected from rain and extreme temperatures, to prevent corrosion and damage.
     • Avoid storing the bicycle near sources of moisture, such as a car wash or boiler room.
2. Avoid Prolonged Sun Exposure

   • • Exposure to sunlight can lead to paint fading and material weakening. If possible, store the bicycle in a shaded area.

Proper bicycle assembly is crucial for ensuring its safe and reliable operation. It is recommended that assembly be performed by a qualified bicycle mechanic. However, if the user decides to assemble it themselves, the following instructions must be strictly followed.

Final Recommendations